It is essential to keep the proper pH balance in order to guarantee that the water in your pool is clean and devoid of hazardous microorganisms. A pool test kit, which is readily accessible at most pool supply retailers, can be used to quickly determine the pH level of your pool’s water.

The test kit normally includes test strips or a liquid reagent in addition to a pH color chart. You can either dip the test strip into the liquid reagent or mix a few drops of it with a tiny amount of pool water to use the kit. You can determine the pH level of the water by comparing the color of the test strip or reagent to the pH color chart.

The pH of the water in your pool should ideally range from 7.2 to 7.8. You can add a pH increaser to raise the pH if it is too low. You can add a pH decrease to lower the pH if it is too high.

It’s crucial to regularly check the pH level of your pool, especially if it gets a lot of use or is exposed to harsh weather. You can keep your pool clean, secure, and fun for everyone who uses it by maintaining a regulated pH level in the water.

Pool maintenance must include shocking the pool. To get rid of germs and other impurities, you need to add a lot of chlorine to your pool. Here is how you do it:
1. Test the water: Before shocking your pool, use a pool test kit to check the pH and alkalinity levels to make sure they are within the approved range. This will help you determine the quantity of shock you need to add.
2. Choose your surprise: Granular, liquid, and non-chlorine shocks are some of the several kinds of pool shocks that are offered. For the particular sort of shock you select, adhere to the manufacturer’s directions.
3. Apply the shock: After sunset or at night, when the sun has set, add the shock straight to the pool water. Along the edge of the pool, slowly and evenly distribute the shock.
4. Start the pool filter: At least eight hours after adding the shock, start the pool pump and let it run. The shock will be more dispersed throughout the water as a result.
5. Retest the water: Test the water once more after 24 hours to make sure the chlorine levels are back within a safe range. Retest after 24 hours if the levels are still elevated.
It’s important to remember to shock your pool on a regular basis, particularly after prolonged periods of rain, high pool usage, or when you observe cloudiness in the water. Maintaining a clean, clear, and safe swimming environment in your pool requires this action.

There are a few warning indications that your pool may be leaking. Secondly, if the water level in your pool is persistently lower than typical, there could be a leak. Another clue is if you find wet areas or puddles around the pool or on the deck. You may also perform a basic bucket test by filling a bucket with water and setting it on the pool stairs. After 24 hours, check the water level in the bucket and in the pool. If the pool water level has dropped more than the bucket water level, there is most certainly a leak. To prevent further damage to your pool and surrounding places, we recommend contacting a professional pool service company as soon as possible to detect and repair the leak.